Posts in General Crafts Category
This year recycle your leftover toilet paper rolls into tubes of terror, by turning them in to Halloween-themed door knob decorations! Here's how.
Toilet Paper Rolls
Thin Wire or String
Hole Punch (optional)
- Cut paper to fit around toilet paper roll, allowing for an 1/2"-1" overlap. For the ghost and jack-o-lantern versions, use a piece of white or orange paper. For the mummy version, cut several strips of linen print scrapbooking (or plain, off-white) paper.
- Apply glue to paper; wrap around toilet paper roll. For the mummy, apply one strip at a time, overlapping them as you go.
- Cut eyes and mouth out of scraps of black paper. Glue face onto roll. For the ghost, cut a zig-zag strip of paper; glue to bottom of roll.
- Punch (or poke with a pin) holes about 1/4" down from both sides of the top of the roll. Thread an 11" piece of wire or string through the holes; twist or tie to secure.
- Hang 'em for haunting!
Feeling creepy; feeling crafty? Don't forget about our other, Halloween crafts!
DIY Spooky Tree
Embroidered Trick or Totes
Snapsuit Baby Costumes
On a personal note, my one-year project with PBS Parents as the crafts columnist, has come to an end. It's been an honor to work with Tracey Wynne, and such a respected, public programming company. I've truly enjoyed my time spent here at Craft Apparent, hanging out with all of you parents who by crafting with and for your kids, have chosen to nurture creativity in the future leaders of our country. I dig that.
I hope you'll continue to check in with me for project information, over at VickieHowell.com.
Have a safe (and crafty) Halloween!
Craft Apparently Yours,
Halloween is like the crafter's Christmas, so how is it that this year's spooky month has crept up on me like a phantom? Here we are in October though, so it's time to whip together some quickie decorations that will thrill the kids without killing us busy parents!
We're big fans of the spooky trees in our house. They're fun to decorate, make great candy displays, and add just the right combo of cute and creepy, to pretty much any setting. Here's how you can can make your own!
Dead, Tree Branch(es)
Spray Paint OR Craft Paint & Sponge Brush
Half Ball of Dry, Florist's Foam
Unbleached Cotton, Muslin or Gauze
Jewelry Wire & Trimmers (optional)
Halloween Themed Ribbons & Trims
Needle & Thread
- Find a dead branch or (if they're smaller) branches.
- Spray or hand paint branch (if the kids are helping, I recommend the latter).
- Rip fabric into strips (so edges are frayed); then cut into workable, short pieces.
- Using your finger or a popsicle stick, spread a layer of glue over a fabric strip. Lay strip on top of foam base; spread flat. Repeat process until foam is completely covered. Let dry.
- To make a tree-dwelling spider, glue small and large black buttons, side-by-side to base. Add 8, pieces of yarn or string to create legs. Place base on a plate.
- Use scissors to puncture a hole in the top of base; push branch(es) firmly into foam.
- Make a candy corn garland by using a needle and thread to string candy and beads. It helps to tie a knot around each bead, to keep them in place. Drape garland on spooky tree; spread excess candy corn around base.
- Layer a smaller button on top of a contrasting colored, larger button. String a small piece of jewelry wire through button holes; twist wire around branch to secure it to tree. Repeat for as many button ornaments as desired.
Note: If you don't have wire; use thread or sting to tie buttons to branches.
Other Ornament Ideas
- Cut Halloween themed ribbon into varying sized pieces; randomly tie them into bows and knots throughout tree.
- Finish your spooky tree off by adding novelty webbing to any remaining, barren places on the tree.
- Plastic spiders
- Recycled doll heads
- Crocheted ghosts
- Pom-pom bats
- Construction paper or styrofoam tombstones
Hope your October is spooktacular!
Craft Apparently Yours,Vickie
There may be nothing new about recycling crayons (after all, my mom was doing it in the 50's), but there's something about molding something old into a new version of itself that's so uniquely...now.
This project is a usable, versatile craft for all ages. The finished product makes great teacher gifts, favors for birthday parties, or back-to-school treats for the kids. Have fun experimenting with different color combos and tray shapes--I personally, have my eye on on a robot ice tray for our next batch--and use this opportunity to chat with your children about everything from the basic chemistry of wax properties changing, to where colors fall on a color wheel. Have fun!
Unwanted Wax Crayons (wrappers removed)
Silicon Ice Cube Trays OR
Plastic Cups & Wood Skewers (microwave version only)
Microwave (Solid Color) Version:
- Combine like color pieces, into sacrificial cups (trust me, you won't want to drink out 'em after they've been crayon'd!).
- Cook in microwave until melted (about 5-9 minutes); stirring with skewer, as needed.
- Pour melted crayon into candy mold. Work quickly, because the wax thickens fast!
Oven (Marbled) Version:
- Break crayons into small pieces.
- Place pieces into a silicon ice tray. Kids love being a part of this process, because they can mix & match colors to create their own, little works of art! (My son Tristan, filled the two bottom hearts with colors to look like "camo" and "sand camo". Boys.)
- Bake in oven at 250 degrees for 20 minutes, or until crayons are completely melted. Carefully remove from oven, taking care not to spill the hot wax.
- Place trays into freezer for about 30 minutes to harden.
- Pop your crayon creations out of the trays and enjoy!
Craft Apparently Yours,
Nothing's better than a good summer read, and I've got just the craft to keep your kid's nose in a book! All you need are a few simple supplies, a little bit of time, and you and your child can create paper clip page markers.
Jumbo Paper Clips
Glue (Liquid Fusion or hot glue work well.)
Misc. Buttons & Decorative Bits
1. Choose your button or bit. I found the chip board letters used in the book marks below in the scrapbooking section of the craft store. Other options ,however, are game pieces or magazine letters glued onto card stock. (Turn this step into a game by challenging your child to find their own initials or spell out the name of a character in the book their reading!)
2. Glue paper clip to the back of a decorative bit. This is a great opportunity to use those random buttons collected from old clothes and grandma's sewing basket.
3. Let the bookmark dry on a piece of wax paper. While you're waiting, make some more. This time, play with layering buttons with silly bits like google eyes!
Eye Spy a Good Read!
Craft Apparently Yours,
It's rhyme time here on Craft Apparent and this week we're teaming up with Sesame Street again with two crafts for you! Start here with a new spin on an old game, Memory. In the traditional version, the player turns cards over to reveal different pictures, hoping to find a match. In this version, the goal is to find the rhymes.
Once this craft is picture perfect, cap-off your rhyme-themed creativity by heading over to Sesame's Kid-tivity
page for instructions on making rhyme picture magnets out of recycled container lids. Let's get started!
4 x 6 Photos of Rhyming Objects
Decorative Paper (Optional)
Photo Mounting Squares or Double Stick Tape
- Use a camera to snap shots of objects around the household that rhyme. Get your kiddos involved in searching out the objects to encourage awareness of rhymes in their environment. Older siblings can get involved too, by being put in charge of shooting the photographs!
Psst! Need a speedier route to getting this project done? I hear ya, mama (or dad)! Feel free to use my pictures
instead of taking your own. Just right-click and save to your computer.
Rhyme: Sock & Clock
- Print out photos. I recommend having at least 4 different rhymes to create a game. The more advanced your child becomes, the more cards you can add in the future.
Rhyme: Owl & Towel
- Cut 4 1/2" x 6 1/2" card stock pieces for each photo.
- Embellish card fronts by taping colorful paper strips to them.
Rhyme: Doll & Ball
- Use photo mounting squares or tape to stick photos on back of each card.
- Set up the game for your child by laying the cards all face down on a table and let the memory rhyming begin!
Rhyme: Cat & Bat
This week we've teamed up with the folks at Sesame Street to bring you double the crafty goodness! Your kiddos can make either no-sew or learn-to-sew versions of a basic, Cookie Monster puppet here at Craft Apparent
then, let their fingers do the walking over to the Kid-tivity
page of the Sesame Street website to draw their own Cookie Monster tote bag! That's 1, 2, TWO cookie-tastic creations!
2 Pieces of Blue Craft Felt
Scraps of Black & Tan Craft Felt
Learn-to-Sew Version Only:
Plastic Needle & Yarn
Small Point Hole Punch
- Trace patterns on to appropriate colored felt. Cut out 2 body pieces, 1 mouth and 1 cookie.
- Glue around the outer edge of 1 body piece; lay 2nd body piece on top.
- Glue on mouth, googly eyes and cookie.
- Cut out small pieces of black felt for chocolate chips; glue on to cookie. Cut out small pieces of brown for crumbs, glue on to mouth.
Felt puppets are a great project to teach children the very basics of hand-sewing. Here's how to use this same puppet pattern as a Stitching 101 tutorial for your kiddo!
- Cut out pattern and pieces as for No-Sew version.
- Holding BOTH body pieces together and using hole punch, make holes every 1/4" or so (and about 1/8" in from the edge) all the way around.
- String a long piece of yarn onto a plastic yarn needle; knot the end. Show your child how to come up through the 1st hole of the two body pieces and down through the 2nd hole to make their first stitch. Then, have them repeat that stitch all the way around the puppet. Once puppet is completely sewn together, knot yarn and cut off.
- Glue cookie, eyes, mouth, chocolate chips and crumbs as for No-Sew Version.
Place puppet on your hand and exclaim, "C is for crafting and that's good enough for me!"
Is there anything that duct tape can't make or fix? I don't think so. Which is why this year for Father's Day I say, swing by the hardware store and let some tape do the gift-y trick!
This week on Craft Apparent I show 3, no-sew projects that kids can make for dad (with a little help from mom) that are as cool as they are crafty. Here's the scoop on turning a few strips of sticky into a duct tape wallet, card holder or techie gadget sleeve!
Rolls of Duct Tape in Two Colors
Ruler or Measuring Tape
Techie Gadget Sleeve
Techie Gadget Sleeve Tutorial
- Measure dad's phone, pda or mp3 player, taking care to include the depth of the device in the overall width measurement. Add about a 1/4" to the length so that the sleeve will be a bit taller than the gadget it's covering.
- Create duct "fabric" by cutting tape strips to appropriate width; lay pieces sticky-side-up; overlap & stick. Repeat until piece is appropriate length. Then, layer pieces sticky-side-down on top of existing piece until it's completely covered. This completes the back piece of your gadget sleeve. (See below) Repeat once more, for sleeve front.
- For striped detailing, cut narrow strips of a contrasting color of duct tape. Stick diagonally onto sleeve front. Trim off excess. If desired, repeat on back piece.
- Use thin strips of tape folded over 3 sides to seal front and back pieces together to create sleeve.
- Create duct "fabric" using method above. For the wallet you'll need front & back pieces each measuring 8" x 3", and an additional 3 1/2" x 2 1/4" pocket piece.
- Seal front and back pieces together with tape strips.
- Tape card pocket onto the righthand side of the front of the wallet. Fold wallet in half so that the pocket is now on the inside.
- Cut several small pieces of contrasting tape; stick onto outside of wallet in "DAD" formation.
- Create duct "fabric". For the card holder you'll need front & back pieces each measuring 3 3/4" x 2 1/4".
- Seal front and back pieces together with tape strips.
- To create stripes cut 2, narrow pieces of tape and wrap them each around card sleeve.
Happy Father's Day crafting!
Got crafty questions? Ask me here!
Sometimes it's the small gestures that make us feel the most appreciated. This week you can show your child's teacher a little love with these mini, mementos of gratitude! A spice jar filled with a single serving of solitude--whether it be to eat, drink or soak in--is an easy way to give a bit back to the molders of our wee one's minds.
Spice Jars or Other Small Containers
Fabric, Ribbon, & Trims
Buttons or Other Trinkets
Bath Time Bottle
- Got 5 minutes (not including dry time)? Then you can make a deserving teacher this treat. Fill container with bath salts--spice jars hold the perfect amount for one, luxurious bath!
- Using hot-glue or other strong adhesive, affix an over-sized button or brooch onto the lid of a spice jar. Let dry.
Note: If the button or brooch you choose has a shank or pin preventing it from laying flat on the lid, just break that part of with a pair of pliers or jewelry snippers.
Kudos Candy Jar
- Be sweet to "Teach"; create a candy container just for him or her! Fill a small jar with a colorful, sugar-y treat.
Psst...this project is a also a great teaching opportunity-- encourage thoughtfulness by getting your child to ask teacher what their favorite candy is!
- Cut a circle of fabric about 2" larger than the container's lid. Using regular ol' glue, cover lid with fabric. Glue on a bit of trim around the lid sides; add an optional trinket embellishment to top it off.
- Go nuts for the teacher who prefers salty snacks. Fill a small jar with gourmet cashews--the perfect, healthy solution for the mid-day hungers!
- Tiny treasures don't have to look feminine. A recycled buckle embellished lid that's been wrapped with twine, give gift jars a more rustic style. Print out a name or message on paper, glue or sew it to a strip of cotton and attach it to the buckle for an extra, personal touch!
As the daughter of a teacher, I just want to send an extra loud shout-out to all of you amazing educators out there who tirelessly enrich the lives of our children. Your hard work and dedication are something that the students you've encouraged, will carry with them for the rest of their lives. Thank you!
Celebrate the Earth everyday and say, "Yes I CAN" to planting by upcycling cans, bottles and jars from your recycle bin to your garden! This is a great opportunity to work with your kids on not only embracing nature, but showing them how one man's trash can be another man's planters. Paired with sweet, colorful cacti and succulents, salvaged containers can put the "eco" in your patio dECOr. Here are a few ideas how you and your family can make plant pots with a (re)purpose!
Soda Bottle, Jam Jar or Soup Can
Different Trims (Twine, Bias Tape, Ric-Rac, etc.)
Drill (For kids, I recommend a Craft Drill)
Tiny Cacti & Succulents
- Cut a plastic, pop bottle in half; make slits in the bottom for water to escape.
- Cut out fabric appliques (I chose flowers from some oil cloth scraps I had). Glue appliques and bias tape or ribbon trimming around bottle.
- Drill hole or holes in bottom of can.
- Cut a piece of fabric long enough to wrap around a soup can, adding a 1/2" to overlap. Cut 2 pieces of ric-rac trim the same length.
- Spread a thin layer of glue around can; lay fabric on top. Add an additional dab of glue where the fabric overlaps. Glue on ric-rac trim.
- Cover a jam jar (or other glass bottle) with a thin layer of glue. Starting just below the jar's rim, wrap twine around until completely covered. Snip off excess.
- If you're using a jam jar then you'll have a lid with a removable top. Ditch the top and glue a length of ribbon around the lid.
Once the glue has dried on all of your repurposed pots, fill each one with soil, a tiny plant and water.
Spring has (almost) sprung which means it's time to get our outdoor craft on! With just a spoonful of creativity, your family can whip-up an eco-friendly wind chime out of recycled utensils -- so, clean out those cabinets for a D.I.Y. clapper made from everything but the kitchen sink!
Indoor/Outdoor Spray Paint
Spray Sealant (optional)
Clear Jewelry Cord or Thread
Colorful Bead (optional)
- Thoroughly coat wooden spoons with spray paint. If desired, also coat with an all-weather, spray sealant. Let dry.
- Drill a hole in each spoon handle, about 1/2" down from tip.
- Knot a piece of jewelry cord through a spoon's hole. Feed the opposite end of cord up through the inside of one of the colander's holes and back down through another. Pull until desired length; knot off and cut excess. Repeat for as many spoons as it takes to create the look you're going for.
- Tie a hanging loop of cord onto top of colander; slide decorative bead onto an additional piece of jewelry cord, knotting to keep in place.
- Hang and enjoy the clickety-clack. What's that? It's the sound of craftiness!
P.S. Don't forget to share pictures of your crafts in our Flickr Pool