Visit Your Local PBS Station PBS Home PBS Home Programs A-Z TV Schedules Watch Video Donate Shop PBS Search PBS
Title Image
FREE ROUTER TIPS by e-mail!
Enter your e-mail address below
 
  Home | Episode Guide | Dynamic Calculator | Our Sponsors |
Unique Image
  

Series 1000

This new series was released to PBS in December of 2001. Bob and Rick start with the Box of Hearts. The Secretary is completed in four parts, the desk component can be used as a stand alone project. The Wedge Stool complete with a dip angle top which adds comfort and a carrying handle. Next up the Pediment Mirror which uses pattern work and turning tips followed by the Stilt Cabinet a truly modern and unique piece of furniture. The Dresser Case uses decorative molding bits, an attractive inlay on the lid complete with brass feet, a perfect gift for small treasures. The Corner Hutch with adjustable shelves will display many special trinkets. Finally the Mission Table with unique designs on the wide legs adds character to this piece which can be used as an Oak Table or Bar Stool.

  • 1001 - Box Of Hearts
  • 1002 - 1005 - The Secretary
  • 1006 - Wedge Stool
  • 1007 - 1008 The Pediment Mirror
  • 1009 - The Stilt Cabinet
  • 1010 - Dresser Case
  • 1011 - 1012 - Corner Hutch
  • 1013 - The Mission Table
  •  

    1001 - Box Of Hearts
    series_1000_1001.jpg     
    Paduk and ash woods compliment one another in this Box of Hearts. Box corners and a front splice fasten the box together with heart joinery that is decorative and strong. Further decoration is provided with a heart inlay in the lid. In this episode (#1001) of the Router Workshop, Bob and Rick use contrasting woods for the unique Box of Hearts.


    1002 - 1005 - The Secretary
    series_1000_1005.jpg     
    A beautiful Oak table in episode #1002 (Part 1), that can be built as a separate project, supports the modern desk featured in this four-part program. Experts, Bob and Rick Rosendahl show step-by-step procedures for routing the Secretary Table.
    The desk component (Parts 2 and 3 in episodes 1003 and 1004) can be made as a stand-alone project as well. The desk case is pattern cut with step by step directions in episode 1003. Features include one drawer with side pullouts that support the lid/writing surface when the desk is in use. The lid folds up to hide the writing paraphernalia when the desk is not in use.
    Bob and Rick construct handy cubbyhole compartments and the desk drawer in Part 3 of the Oak Secretary in episode 1004 of the Router Workshop, Series 1000.
    In episode 1005, Bob and Rick fashion a bookcase with glass doors that can be used alone or can be built as a part of the Oak Secretary. Adjustable shelves, glass doors and a molded top cap add that fine furniture touch to this exciting project.
    1002. The Secretary, Part 1, Table
    1003. The Secretary, Part 2, Desk Case
    1004. The Secretary, Part 3, Drawer and Cubbyholes
    1005. The Secretary, Part 4, Bookcase


    1006 - Wedge Stool
    series_1000_1006.jpg     
    Bob and Rick rout pattern pieces to produce a stool that is comfortable to sit on or rest your feet on. The dip angle top adds comfort and the carrying handle is handy and practical. The rounded ends make sturdy legs and wedges hold the rail in place. This is the Wedge Stool on episode #1006 of the Router Workshop.


    1007 - 1008 The Pediment Mirror
    series_1000_1007.jpg     
    Layout, pattern work and turning tips are important parts of this decorative Walnut mirror frame. Rick and Bob explain these in Part 1 of The Pediment Mirror, Episode #1007. The curved decorative pediment utilizes meticulous layout and bit choices to produce the pleasing crown of the Pediment Mirror. Follow the fascinating steps shown by Bob and Rick Rosendahl in part 2, Episode #1008 of the Router Workshop.


    1009 - The Stilt Cabinet
    series_1000_1009.jpg     
    Professional woodworkers, Rick and Bob Rosendahl produce a modern black cabinet on stilt legs in episode #1009 of the Router Workshop. Clear Maple top, pulls and legs offset the black box like cabinet that features an adjustable shelf. Follow the step by step directions for a truly modern and unique piece of furniture.


    1010 - Dresser Case
    series_1000_1010.jpg     
    This Dresser Case allows us to take advantage of the many decorative molding bits available to router woodworkers today. Choose a bit with a pleasing mold and use thick case sides to produce the outside shape in one easy pass. A geometric glued up lid with or without a contrasting inlaid band is used on top the Oak case. Finish with screw-on brass feet. All this is completed in episode #1010 of the Router Workshop.


    1011 - 1012 - Corner Hutch
    series_1000_1011.jpg     
    This is the ideal piece to furnish that 90-degree corner. The experts, Bob and Rick Rosendahl show how to pattern cut the sides, install the bottom and top, make the facing and drill adjustable shelf holes in part 1, episode #1011 of the Corner Hutch in the Router Workshop TV program. In Part 2, episode #1012, the hosts show how to produce a mutton bar door, two inside triangular shelves and install the lower outside shelf. All this is the two-part project, the Corner Hutch.


    1013 - The Mission Table
    series_1000_1013.jpg     
    Wide angled legs bracketed by a lower shelf make up this tall Oak table or barstool. A unique design relieves the plainness of the wide legs that support the simple round Oak top. Tune into the TV program “the Router Workshop” to see The Mission Table on episode #1013 as produced by Bob and Rick Rosendahl






     
    1000_hosts200.jpg



    Legal Disclaimer--Copyright 2001 Woodgrain Productions Inc.. Contact us at | info2@routerworkshop.com