Wild Kratts Creature Power Disc Bunting

Cut a piece of string long enough to loosely stretch across the space you wish to fill with the bunting.

Print several copies of the Creature Power Discs so that you have enough to cover the string with some space in between each disc.

Punch two holes in each creature power disc; one hole at approximately the 11 o'clock position and one hole at approximately the 1 o'clock position. (upper right and upper left)

Lace the string through the hole punches on the creature power discs so that the string loops in one hole punch, goes behind the creature power disc, and then comes out the other hole punch. Do this until all creature power discs are on the string.

Lay the string on a flat surface so that the creature power discs are face down. Adjust the creature power discs until they are evenly spaced along the string. Then tape the string to the back of each creature power disc to secure the discs to the string.

Flip over the string with the discs. You now have creature power disc bunting ready to hang up at your Wild Kratts party.